Support Center

How to wire LFM-20

The LFM-20 is wired as follows:
 
  • Black – represents the line input, 120VAC
  • White – represents the neutral.  The LFM-20 and the load must share the same neutral.
  • Blue 1 (either blue wire) – 24V – 277V input for load switching
  • Blue 2 (either blue wire) – 24V – 277V output for load switching
 
The switch also has a green wire which serves as the ground.  While there is a yellow wire present, it is not needed and should be cut and capped with either electrical tape or a wire nut.



In the case of a 3-way or 4-way circuit, traveler wires are not used when building an Evolve network.  Instead, an LFM-20 may be used in conjunction with an LTM-5 to create a wireless, “virtual” 3-way.  See LTM-5 for further details. 
3c69ff3e06443603ec0ea37e1dacaab9@evolvesupport.desk-mail.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete